MAKE AN SD/MICRO-SD CARD HOLDER USING 3D PRINTER
SD and microSD cards are commonly using nowadays for many things from cameras to miniPCs but how to keep all of them in place is such a pain with most of us. Therefore, I came up with a design to solve this problem. Now, let’s get started!
Here is my final design.
2. Materials and printed parts
Please find in the list below all the materials needed for this project:
- 1x Transparent acrylic (WxLxH = 111×73.5x2mm)
- 1x Black acrylic (WxLxH = 114.5×75.5x2mm)
You can find all the printed parts here: https://www.thingiverse.com/thing:2911250
- 1x Part_01
- 2x Part_02
- 1x Part_03
- 1x Part_04
- 1x Part_05
- 1x Part_06
3. Print settings
- Material: PLA
- Support: No
- Resolution: 0.2mm/layer
- Infill: 20%
- Temperature: 190 (C)
- Print all parts and assemble as in the picture below.
And here is what we got after all these steps:
Let’s take a look with this video below
With this design, your SD and micro SD cards will be kept safely. One of the cool features is you have the place to label each of them.
This box can keep up to 6 SD cards and 5 micro SD cards and you can hold it in your hand.
Firmware engineer, blogger and a makerholic